To create a new director detail table complete the following steps:

1. Click the + Add section below an existing director detail table and select Text section.

This will insert a new text placeholder to the selected location.

2. Click within any existing directors detail table, and:

1. Select Ctrl A on the keyboard, to select the entire table.

2. Select Ctrl C on the keyboard to copy the selected table.

3. Click within the new text section and select Ctrl V on the keyboard, to paste the table into the new text placeholder.

3. The column widths of the newly created table will reset to a default width, which are inconsistent with the existing tables.

4. To resize the column widths:

1. Right click on the table and select Table Properties.

2. Enter 100% in the Width cell, and click OK.

This will widen the table to the width of the text section.

3. Right click on the ‘Qualifications’ cell, and select Cell > Cell Properties.

4. Within the Cell Properties dialog:

1. Enter ‘50’ in the Width cell, and select percent from the dropdown, and click OK.

This will ensure that the width of each column within the newly inserted table is identical to all existing director detail tables.

5. To adjust the text alignment to ensure the text cells within each column correctly align:

1. Right click on the ‘Qualifications’ cell, and select Cell > Cell Properties.

(refer: Step 4c)

2. Within the Cell Properties dialog:

1. Select Top from the ‘Vertical Alignment’ dropdown, and click OK.

Repeat steps 5a and 5b for all cells within the table, excluding the bold title cell.